Safety Fuse Initiation System – Pull Type
The Safety Fuse Initiation System – Pull Type includes preassembled non-electric blasting cap, safety fuse and pull type igniter.
The delay time of the preassembled system according to customer’s request.
SFIS – PULL TYPE TECHNICAL INFORMATION
| Non-Electric Blasting cap: | |
| Strenght | No. 8 |
| Shell material | Aluminium |
| Cap Lenght | 48 ± 1 mm |
| Outer Diameter | 7,1 mm |
| Nominal PETN weight | 0,9 g |
| Delay | None |
| Safety Fuse | |
| Nominal burning time | 120 ± 10 sec/m |
| Diameter | 5 mm – 6 mm |
| Length | According to requested delay |
| Colour | Black |
| Ignitor / Starter | |
| Type | Pull type (two hand operable) |
| Ignition | Friction primer |
| NEQ | approx. 31 mg |
| Safety | Strong pulling force is required |
| Package | |
| Inner package | Sealed aluminum foil bag |
| Outer package | Plywood box |
| Operational temperature | –46 °C … +63 °C |
| Hazard Classification | 1.1B |
| UN Number | UN0360 |
Safety Fuse Initiation System – Push Type
The Safety Fuse Initiation System – Push Type Includes preassembled non-electric blasting cap, safety fuse and push type igniter.
The delay time of the preassembled system according to customer’s request.
SFIS – PUSH TYPE TECHNICAL INFORMATION
| Non-Electric Blasting cap: | |
| Strenght | No. 8 |
| Shell material | Aluminium |
| Cap Lenght | 48 ± 1 mm |
| Outer Diameter | 7,1 mm |
| Nominal PETN weight | 0,9 g |
| Delay | None |
| Safety Fuse | |
| Nominal burning time | 120 ± 10 sec/m |
| Diameter | 5 mm – 6 mm |
| Length | According to requested delay |
| Colour | Black |
| Ignitor / Starter | |
| Type |
Raikka VS2012, Push type (one hand operable) |
| Ignition |
Percussion primer
|
| NEQ | approx. 25 mg |
| Safety |
Secured with safety pin |
| Package | |
| Inner package | Sealed aluminum foil bag |
| Outer package | Plywood box |
| Operational temperature | –46 °C … +63 °C |
| Hazard Classification | 1.1B |
| UN Number | UN0360 |